Dongguan Weiwei Automation Equipment Technology Co., Ltd.

ChenWei Automation

Chen Wei, an all directional solution supplier for wiring harness processing equipment

中文
+86 130-0681-2861
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
    Contact Us
    • manager dai:+86 130-0681-2861
    • Tel:+86 0769-86183586
    • Fax:0769-86189596
    • Email:dg-lixing@163.com
    • address:Fourth floor, No. 56 West Lake Middle Road, Xihu Village, Shilong Town, Dongguan City, Guangdong Province
    Historical records

    The use of the cutter of terminal machine is of vital importance

    source:    time:2018-11-09   Click:406

    The use of the cutter of terminal machine is of vital importance

    In the process of using the terminal machine for production and processing, the use of the tool is of vital importance. In the process of cutting, the vibration of the tool is mainly caused by the vibration of the tool under the condition of long length and small workpiece. In the process of high speed cutting, there will be a lot of noise, which will also cause harm to human body. Proper and reasonable use of this automatic terminal equipment can greatly reduce noise and vibration. Terminal machine used in the process of vibration can be divided into high frequency vibration, intermediate frequency and low frequency vibration, three ways to reduce the vibration method has a lot of kinds, such as the use of sharp knives, for slender workpiece by using 90 - degree Angle to cutting, adjust the cutting specific parameters, reasonable arrangement of feeding process path, etc.

    What problems should be paid attention to in the use of terminal:

    1. During the operation, if there is any abnormality in the machine, first turn off the power, and ask the mechanic to repair and debug in time.

    2. Non-designated personnel are strictly prohibited from debugging or disassembling machine parts by themselves.

    3. During the operation, the power of the machine is not disconnected, and it is forbidden to enter the punching range of fingers or any part of the body, so as to avoid accidents caused by work-related injuries.

    4. During the operation, if you need to leave your job, you must turn off the power before you leave.

    5. When replacing the terminals, the power must be disconnected first and then replaced. It is strictly prohibited to replace the terminals in the operation of the machine.

    6. In the operation, if a terminal is stuck in the tool mold, it must be cleaned with scissors or pick needles before continuing the operation.

    Hot:
    CONTACT US

    Contact person: manager dai

    Machine: 0769-86183586

    Phone: +86 13006812861

    Fax: 0769-86189596

    E-mail: dg-lixing@163.com

    Consultation hotline: +86 13006812861

    Address: Fourth floor, No. 56 West Lake Middle Road, Xihu Village, Shilong Town, Dongguan City, Guangdong Province

    FOLLOW US
    Alibaba QR code

    Alibaba QR code

    Wechat QR code

    Wechat QR code

    Copyright © 2018 ChenWei Automation All Reserved Copyright Record number: Guangdong ICP17038609号