Dongguan Weiwei Automation Equipment Technology Co., Ltd.

ChenWei Automation

Chen Wei, an all directional solution supplier for wiring harness processing equipment

中文
+86 130-0681-2861
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
    Contact Us
    • manager dai:+86 130-0681-2861
    • Tel:+86 0769-86183586
    • Fax:0769-86189596
    • Email:dg-lixing@163.com
    • address:Fourth floor, No. 56 West Lake Middle Road, Xihu Village, Shilong Town, Dongguan City, Guangdong Province
    Historical records

    The cable performance is not up to standard in three ways

    source:    time:2018-11-09   Click:287

    The cable performance is not up to standard in three ways

    Dissociation discharge and disqualification of dielectric loss: dissociation discharge and disqualification of dielectric loss are caused by complex reasons, which are with external shielding. Whether the insulation contains bubbles and impurities, raw material properties and so on are closely related. The elimination method is to keep raw materials clean and strictly follow the process.

    Cable insulation breakdown: the reason of cable insulation breakdown is mainly caused by the impurities mixed with insulation materials and external damage, which is strictly avoided and caused by external damage, so as to avoid impurities mixed in as far as possible, and the semi-finished products are strictly managed to prevent stumbling and collision.
    Mat puncture: the main reason for mat puncture is that the steel has burrs, coils and pierces the cushion layer. The elimination method is the unequal use of unqualified quality requirements of the steel belt.

    A brief introduction to the winding process of the computer stripper

    1. Select the correct coaxial cable model by adjusting the knob;

    2. Straighten the cable and insert it into the bottom of the center hole of the stripper handle;

    3. Close and lock the cover of the stripper, hold the handle, and rotate 7-10 times clockwise at a slow speed.

    4. Open the wire stripper cover and pull out the cable while pressing the yellow flag pin.
    Insulators and cables peel off easily.

    5. Open the wire stripper cover and remove cable debris.

    Hot:
    CONTACT US

    Contact person: manager dai

    Machine: 0769-86183586

    Phone: +86 13006812861

    Fax: 0769-86189596

    E-mail: dg-lixing@163.com

    Consultation hotline: +86 13006812861

    Address: Fourth floor, No. 56 West Lake Middle Road, Xihu Village, Shilong Town, Dongguan City, Guangdong Province

    FOLLOW US
    Alibaba QR code

    Alibaba QR code

    Wechat QR code

    Wechat QR code

    Copyright © 2018 ChenWei Automation All Reserved Copyright Record number: Guangdong ICP17038609号