Dongguan Weiwei Automation Equipment Technology Co., Ltd.

ChenWei Automation

Chen Wei, an all directional solution supplier for wiring harness processing equipment

中文
+86 130-0681-2861
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
  • Dongguan Weiwei Automation Equipment Technology Co., Ltd.
    Contact Us
    • manager dai:+86 130-0681-2861
    • Tel:+86 0769-86183586
    • Fax:0769-86189596
    • Email:dg-lixing@163.com
    • address:Fourth floor, No. 56 West Lake Middle Road, Xihu Village, Shilong Town, Dongguan City, Guangdong Province
    Historical records

    The adjustment steps of the inlet and outlet pressure wheel clearance of the mechanical part of the wire stripper

    source:    time:2018-11-09   Click:400

    The adjustment steps of the inlet and outlet pressure wheel clearance of the mechanical part of the wire stripper

    1. For visual inspection, the outer diameter of the wire should be stripped and the gap between the inlet and outlet wheels should be slightly smaller than the outer longitude of the wire.

    2. Pass the wires through the inlet hole, the positioning frame, the inlet pressure wheel, the positioning catheter, the blade, the baffle, and the outlet pressure wheel in turn. Visually check whether the wire is in a straight line or in the center of the two blade points. If there is any bending, please adjust the positioning frame and positioning catheter so that the wire is in a straight line.

    3. Pressed wire exit qualification round, with the right hand caught into line roller, left hand to pull wire, try the friction between the wire and into the line pressure wheel, if you can pull wire, put into the line adjustment wheel in the direction of fine adjustment, until left hand feel conductor is difficult to pull out, if too compressed brought into line adjustment wheel to the direction of the coarse adjustment, until it is difficult to pull the wire with the hand, but not too compressed the wires is advisable.

    4. Use the same wire and the same operation method to adjust the clearance of the outlet roller.

    Hot:
    CONTACT US

    Contact person: manager dai

    Machine: 0769-86183586

    Phone: +86 13006812861

    Fax: 0769-86189596

    E-mail: dg-lixing@163.com

    Consultation hotline: +86 13006812861

    Address: Fourth floor, No. 56 West Lake Middle Road, Xihu Village, Shilong Town, Dongguan City, Guangdong Province

    FOLLOW US
    Alibaba QR code

    Alibaba QR code

    Wechat QR code

    Wechat QR code

    Copyright © 2018 ChenWei Automation All Reserved Copyright Record number: Guangdong ICP17038609号